Capability
Process sinks
Beckox fabricates chemical-resistant process sinks in polypropylene and PVC — made to measure, with the bowls, drainers, upstands and waste connections your process needs, as single units or complete runs.
Sinks that survive the chemistry
Stainless sinks pit and stain under acid duty; ceramic cracks and chips. A welded polypropylene sink is homogeneous — there is no coating to fail — and can be fabricated with deep bowls, sloped drainers, splashbacks and integral shelving in whatever arrangement the work requires. Welded construction also means a one-piece, leak-free unit rather than an assembly of sealed joints.
- Single and multi-bowl process sinks made to measure
- Integral drainers, splashbacks and upstands
- Chemical-resistant waste fittings and dilution traps
- Support frames and cupboards in matching material
- Sit-on, inset and freestanding formats
Where fabricated sinks earn their place
Plating and anodising shops, laboratories, darkroom and etching work, battery rooms, hospital and university estates — anywhere the drain regularly sees something stronger than washing-up water. Because each sink is welded from sheet, dimensions follow the room: a sink can run the full length of a bench, drop into an existing worktop cut-out, or replace a failed ceramic unit exactly, reusing the plumbing that is already there. Wastes, traps and dilution pots are supplied in the same chemical-resistant materials, so the system is consistent from bowl to drain.
PAGE REVIEWED — 30 July 2026
